Machine Menu
Tablet Inspection Table

Tablet Inspection Machine

TIM-500 Tablet Inspection Table

The TIM tablet inspection machine is used for the manual visual detection and inspection of defective tablets. It uses double conveyor belts made from a FDA approved material, which flip the tablets to be inspected on both sides. The tablets flow from the feed hopper into a vibratory chute where a perforated screen eliminates coarse, dust and chips and then collected in a below container. Tablets enter the inspection stages in a single layer. The tablets are transported on a large conveyor belt, tablet inspection belt made from a FDA approved material.

There are two stages to the inspection machine:

  • Tablets will be inspected on the upper sides and the first operator can easily eject the unqualified tablets. .
  • A special inspection belt will automatically flip the tablets to have them inspected and ejected the bottom sides by the second operator.
  • During both inspection stages, the products lie flat on the belt and do not move or vibrate
  • The inspection machine, Model TIM-500 with tablet turn-over system enables your operators to inspect reliably up to 50 kg of tablets per hour from all sides.
  • With calibrated work lights above the inspection zones, defective tablets can be eliminated by the operators with two flexible hand-held vacuum nozzles.
  • Any possibility of contaminating the product with abrasion of belts or chains is eliminated.
  • Integrated collection box for rejects within reach of the operator.
  • For cleaning purposes the machine can be completely dismantled without any tools within a few minutes, easy to clean, no cross contamination risk.
  • No noisy external vacuum cleaner necessary through the use of compact Venturi suction system Reduced fatigue of the operator through ergonomic design.

30L Tablet hopper
Discharges tablets into a vibratory chute and perforated screen
Tablet Inspection Machine
Tablet Inspection Belt
Dual inspection stages
Tablets lie flat on the belt and do not move or vibrate
Special conveyor system will automatically flip the tablets.
Tablets are flipped and ejected to the bottom sides by the second operator
Visual Inspection System

TIM-500 Tablet Inspection Table

Tablet Inspection Machine

# Model TIM-500 Tablet Inspection Machine
1 Output Up to 50 kg tablets, depending on product & product size
2 Tablet Hopper Size 30L
3 Power 110V 60Hz 1Ph or as required
4 Power 0.6 kW
5 Dimensions 1850 x 850 x 1315 mm
5 Weight 330 lbs